For your own use
An owner-occupier requiring a larger factory and office component, subject to an engineering review of equipment, services and vehicle movements.
INDUSTRIAL · GSD Land
Machang Bubuk Signatures 2 Bukit Teh
Bukit Teh, Penang
FreeholdLight industrialSingle-storey factory with two-storey production office
From RM12,378,000
From RM12,378,000 gross SPA reference for non-Bumiputera plot 3 in the 30 October 2026 chart. The lower Type C reference is a Bumiputera lot and is excluded from this general starting figure. Individual type prices are on enquiry.
Get Floor Plans + Price List
Machang Bubuk Signatures 2: Project Summary
Machang Bubuk Signatures 2 is a six-unit freehold industrial development in Bukit Teh, mainland Penang. Its larger semi-detached factories combine production floors with two-storey office components across Type A, B and C layouts. Compare the actual plot, power requirement and vehicle circulation before choosing a premises for your operation.
Why Choose Machang Bubuk Signatures 2?
Six-unit development
A small industrial development with three named type families.
Larger factory footprints
Published built-up references range from 11,780 to 17,637 sq ft.
Two-storey office components
Separate office planning from the single-storey production floor.
2 tonnes per sq m reference
The stated production-floor load requires unit-specific technical confirmation.
Jalan Besar connection
Compare the proposed road frontage and exact delivery route in Bukit Teh.
Machang Bubuk Signatures 2 at a Glance
- Tenure
- Freehold
- Title / approved use
- Light industrial
- Built-up size
- 11,780–17,637 sq ft
- Est. completion
- March 2028 target; reconfirm schedule
- Total units
- 6 semi-detached factories
- Location
- Bukit Teh, Penang
- Developer
- Corfield Development Sdn Bhd
- Project land area
- To confirm: supplied sources differ between 6.247 and 6.517 acres
- Lot references
- Chart lots approximately 32,281–37,954 sq ft
- Building format
- Single-storey factory with two-storey production office
- Power supply
- To confirm: fact sheet states 400 Amp, while the summary repeats 150 / 200 Amp references. Do not size equipment from these conflicting figures.
- Floor loading
- Production floor: 2 tonnes per sq m; office reference: 0.25 tonne per sq m.
- Height reference
- Production clear-height reference: 10.6 m.
- Service / maintenance
- Confirm the selected unit’s service and maintenance arrangements.
Confirm the selected unit’s current price, availability, approved plan and charges with us.
TAKE A CLOSER LOOK
Machang Bubuk Signatures 2 Gallery
1 / 4Open image
FIND YOUR FIT
Who should consider Machang Bubuk Signatures 2?
For an investment shortlist
A buyer comparing larger industrial tenancies, tenant fit-out costs and the leasing evidence for a small six-unit development.
When to compare alternatives
A business seeking a smaller first premises or a verified high-capacity incoming supply should resolve total cost and technical requirements before selecting a lot.
FLOOR PLANS
Compare industrial floor plans.
Layout and availability references
Types A, B and C appear unstruck in the 30 October 2026 chart. Plots 4 and 6 are marked Bumiputera. This is a dated chart rather than a live stock feed; reconfirm the selected lot.
Compare the shortlisted type families below, then ask for the exact unit’s current availability, price and approved plan.
Type A semi-detached factory17,637 sq ft
Plots 1–4 · plot 4 marked Bumiputera
Four A lots appear unstruck in the 30 October 2026 chart. Confirm exact setbacks and office configuration.
Price on enquiry
Open full-size floor planCheck the price and availability for Type A semi-detached factory.
Type B semi-detached factory17,420 sq ft
Plot 5 · approximately 37,954 sq ft land
One published B lot appears in the supplied chart; reconfirm current stock.
Price on enquiry
Open full-size floor planCheck the price and availability for Type B semi-detached factory.
Type C semi-detached factory11,780 sq ft
Plot 6 · Bumiputera allocation
The supplied chart marks this lot Bumiputera. Confirm eligibility and any release status directly.
Price on enquiry
Open full-size floor planCheck the price and availability for Type C semi-detached factory.
Industrial features & infrastructure
Match the selected unit’s infrastructure with your operating requirements.
Bukit Teh
Location & nearby amenities.
Bukit Teh is on mainland Penang. Compare the actual factory entrance with staff travel, supplier routes and delivery destinations; test vehicle access at operating hours.
Bukit Teh address
Lot 20461, Jalan Besar, Mukim 16, Seberang Perai Tengah, Penang.
Surrounding catchment
Bukit Mertajam, Alma and Permatang Tinggi are named nearby townships.
Road frontage
The supplied reference describes a new road connected to Jalan Besar; verify current delivery access.
BUYER PERSPECTIVE
Pros & Cons
Pros · Reasons to consider
Larger operating space
Three formats offer different production and office arrangements.
Six-unit scale
The entire development can be assessed lot by lot.
Freehold tenure
A possible longer-term occupation base, subject to title conditions.
Cons · Points to compare
Source differences
Site area and incoming power figures conflict across supplied documents.
Eligibility limits
Plots 4 and 6 are marked Bumiputera in the supplied chart.
Schedule needs confirmation
The March 2028 target should be checked against the latest construction programme.
YOUR QUESTIONS, ANSWERED
Machang Bubuk Signatures 2 FAQs
Are the illustrated layouts all currently available?
Types A, B and C appear unstruck in the 30 October 2026 chart. Plots 4 and 6 are marked Bumiputera. This is a dated chart rather than a live stock feed; reconfirm the selected lot.
What price is shown?
From RM12,378,000 gross SPA reference for non-Bumiputera plot 3 in the 30 October 2026 chart. The lower Type C reference is a Bumiputera lot and is excluded from this general starting figure. Individual type prices are on enquiry.
When is completion expected?
March 2028 target; reconfirm schedule. This is a supplied reference, not confirmation of handover. Confirm the contractual delivery date for the selected purchase.
Can I use the property for my business?
Compare your activity with the exact unit’s approved industrial use, planning conditions and licensing requirements before committing. An industrial address alone does not establish approval for every operation.
What power supply should I plan for?
To confirm: fact sheet states 400 Amp, while the summary repeats 150 / 200 Amp references. Do not size equipment from these conflicting figures. Match the confirmed incoming supply and capacity with your equipment schedule; any upgrade requires separate technical confirmation.
How should I assess loading and height?
Production floor: 2 tonnes per sq m; office reference: 0.25 tonne per sq m. Production clear-height reference: 10.6 m. Verify the approved structural specification, concentrated loads, rack layout and equipment clearances for the selected unit.
What should I check during a viewing?
Bring your machinery layout and vehicle dimensions. Check gates, turning space, loading access, office separation, drainage, staff parking and the route used by deliveries.
How do I request floor plans and a quotation?
Use the project or layout enquiry buttons to contact Eric or Jason. Request the selected lot, approved drawing, latest availability and full written quotation.
LET’S DISCUSS MACHANG BUBUK SIGNATURES 2
Your next move.
With a team you know.
Tell us your budget, preferred layout and plans. Eric and Jason will help you explore the right unit, current prices and available packages.
Eric Lau
REN 76299
Father · Real estate negotiator
WhatsApp Eric
Jason Lau
REN 75343
Son · Real estate negotiator
WhatsApp JasonCONTINUE YOUR SHORTLIST
